Choosing uPVC Replacement Window Handles

Nearly all customers agree that the upvc replacement window handles are easy to install and feel as good quality. But it's important to understand that the kind of handle you choose should be appropriate for uPVC Replacement Window Handles your window.

The height of the step is the most important aspect. It is the distance between the handle and the frame, or base. Other considerations include lockable mechanisms and designs.

Replacement parts

You can buy a variety of replacement upvc handles. They come in a variety of colours and styles so there's sure to be something that fits your existing windows. It's easy to purchase a product on impulse particularly when the handle breaks. Therefore, it is best to do some research before buying the replacement. The first thing to consider is the type of upvc handle you currently have and what the difference between kinds is. The table below shows the most popular handles to help you choose the one that will fit your windows made of upvc.

Most double-glazed windows today come with epag handles. They are typically attached to the frame with two screws that are screwed in from both sides.

They have a spindle bar on the back which can be of a variety sizes and this will determine the way they operate (either left or right handed). It's important to take the measurements of the handle you currently have to ensure that you order the correct replacement.

Usually fixed with two bolts similar to the Espag handle but they are positioned low from the frame, which means that the handle will not poke through your blinds. This is a great choice for those who want the handle to blend in with your blinds, and you have upvc windows.

Cockspur handles resemble Espag handles, however they have a nose that closes over a wedge that sits on the frame of the window. This kind of handle can be often found on older windows made of upvc as well as some wooden windows.

Tilt and turn handles are often found on casement windows and can be operated by turning the handle or pressing on the top of the window replacement. This opens the window from the inside, allowing you to clean outside without having to climb to the ladder or climb over the garden fence. They are also a great option for people with restricted mobility. They can be an excellent way to increase security and accessibility within the home.

Tips and tricks

A lot of people will need to replace their uPVC window handles at some time. It is essential to know some tips and tricks that will make the job easier.

The first thing to do is determine the type of handle you have at home. Depending on the kind of handle and the locking mechanism, it could be necessary to replace the handle and lock. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll have to replace them along with the handle.

Thankfully, the majority of uPVC handles adhere to industry standards and are alike. This makes replacing them an simple process. First, you must remove the screws on the handles. They are typically pozidrive screws. Once the screw covers are removed then you'll be able to remove the handle.

If you've got the handle separated from the handle, it's recommended to make note of how much of the spindle extends from the base of the handle. This will enable you to measure the length of the spindle to determine an alternative handle. Simply take note of the length the peg is sticking out of the bottom of handle.

This is especially important for inline uPVC windows handles, as they are always straight and will only open to the left or right. They won't work in the middle. It is a good idea if you're not certain of the kind of handle you have at your home, to borrow a handle to see how it works.

You can also determine the handedness of a uPVC window by observing how the handle spins when it is in use. Handed handles can turn either clockwise or counter-clockwise. If you are unsure you are, ask someone else to open the window with the handle and see how it works.

Take a measurement of the spindle

The selection of the right replacement handle for your windows could be a challenge as there aren't all handles that are the same size. It is important to measure the spindle accurately when installing a new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles and they operate in different ways, so it is vital that you know which kind of handle you have and the type of locking system.

Espag handles come with a spindle that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle this turns the lock within the gearbox, and opens the window. They are used on uPVC windows with casement and can be locked with keys to increase security.

Cockspur handles have a "nose" that closes over a wedge-shaped striker block on the frame. They are usually found on older double-glazed uPVC windows. They are also easy to use and can be locked with keys. It is more difficult to replace these handles as they aren't as common as the espagnolette handles.

If you have a tilt and turn uPVC, you will require a replacement handle with an alternative locking system. The handle will tilt the window and allow it to be turned around to fully open it. You will need to ensure that the handle you choose has a spindle length of at least 55mm or it will not be able to reach into the window frame.

You can follow the same method to remove and replace this type of uPVC handle, but you will need to be cautious when removing the old one. It is possible to open the window a bit larger than normal to ensure you reach both screws that are fixing it to the frame. Once you have put in your new uPVC handles and verified that they are in the correct position, you can tighten up the screw covers and test the lock to ensure it is working correctly.

Replace the handle with the new one.

When you have the proper handle replacement it can be screwed in place. It will require a screwdriver, and an electric one could be more convenient. When screwing, it is important not to over tighten the screws as this can cause the handle to warp or crack.

The other important step when installing the handle is to put in the spindle. This is the component that runs through the handle and controls the locking mechanism inside the window. It is essential that the part is fitted correctly because this will allow the window to be opened and closed securely.

There are a variety of different kinds of uPVC window handles. These include:

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved shape which is ideal for hard-to reach windows.

Tilt and turn handles - These are used to control the opening and uPVC Replacement Window Handles closing mechanisms for tilt and turn windows. They also allow for the movement of windows.

These are the most commonly used and the majority of uPVC windows have these in their place. In the UK they are usually known as "Bay Windows".

If your uPVC window handle is broken it can be extremely frustrating. There isn't any need to replace the entire uPVC window because of a damaged handle. There are several easy steps that can be taken to repair or replace a damaged uPVC window handle.

By identifying the kind of window you have, measuring the spindle length and purchasing a replacement handle you can fix your broken window handle. It is crucial to be patient and ensure security when working with windows or tools, but this is a easy task. It can be the difference between a secure and secure home or a unsecured open window! If you have any concerns or would like to speak to a specialist about replacing your window replacement near me handle, call Bridgewater Glass. Our team is skilled and knowledgeable to help you with any issues.