Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the window panes yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor and could be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the door repair and the window is substantial, you may prefer an alarm system that has a window. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window repairs near me that is sagging. You'll first need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and Window Repairs verify the fit. If you're happy with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. Often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. The first step is to close the window and then perform an experiment to ensure that it fits. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you wake up every morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with a breeze It could be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It is very easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. Sending us a picture via our website will often resolve the problem. We are more than happy to offer advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, creating an opening between the frame and sash. They can be fixed by giving them a good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it's possible to give them a clean but in some cases it might be necessary to have them replaced.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.

One of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be put on the top of your windowsill. These will keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it could be more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.